Carel UE055 User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
27
EN
“UEX-PLUS” +030220621 - rel. 1.1 - 30.05.2008
installeruserservice
8.6 Supervisor
parameter range def. UOM
identification
number for BMS
network
0 to 200 1
Com. speed
1200, 2400, 4800, 9600,
19200
19200 Bps
Protocol
CAREL, MODBUS,
LON, RS232, GSM(*),
WINLOAD
CAREL
Enable On/OFF from
supervisor
SI/NO NO
(*)
By setting the GSM protocol, when alarms are activated the humidi er
sends an SMS (short message service) to the mobile telephone number
set.
1. Important: to send an SMS, the humidi er must be  tted with the
electronic board code PCO100MDM0, the GSM modem kit
code PLW0PGSM00, and a SIM card in the modem (see par. “GSM
network connection” page 17).
“SMS” con guration procedure
set the GSM protocol from the “Supervisor screen (see “Supervisor
screen > “Protocol”);
press ENTER until the cursor is at the start of the screen;
press the DOWN button and access the “SMS” screen;
con gure the “SMS” screen:
SMS
parameter range default
text on mask send SMS
enter text(*) CAREL HUMISTEAM
mobile number
enter mobile phone
number (*)
-
modem status (display only)
parameter display default
field
percentage of signal -
alarm modem
NO/YES -
(*) Text characters:
ABCDE FGHI J KL
MNOP QR S T UV WX
YZ0123456789
+-*:;,()/#%
Function buttons:
UP or DOWN to select the characters;
ENTER to save and move the cursor to the next character.
Important: the humidi er only has one communication line (baud
rate and protocol). When enabling SMS messages, a supervisory
network can not be created (and vice-versa).
Important:
only use numeric characters;
disable the PIN code on the SIM card;
messages can only be sent in SMS format;
the SMS messages are subject to the charges and conditions of the SIM
card network operator.
CAREL declines all liability for the failure to send or receive SMS.
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Comments to this Manuals

No comments