Carel uC2SE User Manual download pdf (Page 14)

ENGLISH

µC

SE process chiller +030220416 - rel. 1.1 - 27.04.2010

4.3 Parameter tables

The following tables show of the parameters divided by type/family (e. g. compressor, probes, fans etc.).

• Key to the parameter tables

Level (default)

S= super user

F= factory

D= direct

Visibility:

The visibility of some groups depends on the type of controller and the value of the parameters.

D= defrost (if D01=1)

F= fan (if F01=1)

L= low noise (if F15=1-3)

N= NTC probe (if /04-/08=2)

P= pressure (if /04-/08=3)

V= driver (if H08 =1-3)

X= expansion (if H08=2-3)

M= pump down (if D17=1)

W= watch (if the clock board is ﬁ tted)

- = always present

Supervisor variables:

R/W = supervisor read/write parameter

R= supervisor read-only parameter

4.3.1 Evaporator and condenser temperature and pressure values: (d*)

display

indicat.

parameter and description default

level

min. max. UOM variat. default visibility supervis.

variable

Modbus variable

type

dtE Current value of DTE D 0 0 - - 0 - 99 (R) 99 Analog

dC1 Current value of DTC1 D 0 0 - - 0 - 100 (R) 100 Analog

dC2 Current value of DTC2 D 0 0 - - 0 - 101 (R) 101 Analog

Tab. 4.a

4.3.2 Probe setting parameters: (/*)

display

indicat.

parameter and description default

level

min. max. UOM variat. default visibility supervis.

variable

Modbus variable

type

/01 Probe type B1 0= not present

1= present

F 0 1 Flag 1 1 - 1 (R/W) 1 Digital

/02 Probe type B2 0= not present

1= present

F 0 1 Flag 1 0 - 2 (R/W) 2 Digital

/03 Probe type B3 0= not present

1= NTC Cond. Probe

2= NTC Out. Probe

3= differential control probe

F 0 3 int 1 0 - 14 (R/W) 221 Integer

/04 Probe type B4 0= not present

1= ON/OFF (D.I)

2= NTC Out. Probe

3= ratiometric cond. Probe, 5 Vdc

4= differential control probe

F 0 4 int 1 0 - 15 (R/W) 222 Integer

/05 Probe type B5 0= not present

1= present

F 0 1 Flag 1 0 X 3 (R/W) 3 Digital

/06 Probe type B6 0= not present

1= present

F 0 1 Flag 1 0 X 4 (R/W) 4 Digital

/07 Probe type B7 0= not present

1= NTC Cond. Probe

2= NTC Out. Probe

3= differential control probe

F 0 3 int 1 0 X 16 (R/W) 223 Integer

/08 Probe type B8

(expansion)

0= not present

1= ON/OFF

2= NTC Out. Probe

3= ratiometric cond. Probe, 5 Vdc

4= differential control probe

NB. if more than one differential control probe

is conﬁ gured, the priority is: B8, B7, B4, B3

F 0 4 int 1 0 X 17 (R/W) 145 Integer

/09 Min. value voltage input F 0 /10 0.01 Vdc 1 50 P 18 (R/W) 225 Integer

/10 Max. value voltage input F /09 500 0.01 Vdc 1 450 P 19 (R/W) 226 Integer

/11 Pressure min. value F 0 /12 bar 1 0 P 1 (R/W) 1 Analog

/12 Pressure max. value F /11 999 bar 1 345 P 2 (R/W) 2 Analog

/13 Probe B1 calibration F -12.0 12.0 °C/°F 0.1 0.0 - 3 (R/W) 3 Analog

/14 Probe B2 calibration F -12.0 12.0 °C/°F 0.1 0.0 - 4 (R/W) 4 Analog

/15 Probe B3 calibration F -12.0 12.0 °C/°F 0.1 0.0 - 5 (R/W) 5 Analog

/16 Probe B4 calibration F -12.0 12.0 °C/bar/°F 0.1 0.0 - 6 (R/W) 6 Analog

/17 Probe B5 calibration F -12.0 12.0 °C/°F 0.1 0.0 X 7 (R/W) 7 Analog

/18 Probe B6 calibration F -12.0 12.0 °C/°F 0.1 0.0 X 8 (R/W) 8 Analog

/19 Probe B7 calibration F -12.0 12.0 °C/°F 0.1 0.0 X 9 (R/W) 9 Analog

/20 Probe B8 calibration F -12.0 12.0 °C/bar/°F 0.1 0.0 X 10 (R/W) 10 Analog

/21 Digital ﬁ lter U 1 15 - 1 4 - 20 (R/W) 227 Integer

/22 Input limitation U 1 15 - 1 8 - 21 (R/W) 228 Integer

/23 Unit of measure 0= °C

1= °F

U 0 1 Flag 1 0 - 5 (R/W) 5 Digital

Table. 4.b

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 51 52

Comments to this Manuals

No comments

Carel uC2SE User Manual Page 14

Comments to this Manuals

Related products and manuals for Thermostats Carel uC2SE