AIREFRIG AUSTRALIA PTY LTD
ALL PRICES ARE EXCLUSIVE OF GST
SUBJECT TO CHANGE WITHOUT NOTICE
CAREL HUMIDIFIER
HUMIDISK HUMIDIFIER
humiDisk10/65 is an air humidifier based on the principle of atomising water
through centrifugal force. This humidifier can be connected to mains water.
humiDisk65 is supplied with an electrical anti-freeze heater. This allows the
humiDisk65 to operate at temperature down to -2 °C.
humiDisk10 does not have an electrical anti-freeze heater. The humiDisk10 can
work at temperature >= 1 °C.
When turned off (humidistat) the water contained in the humiDisk10/65 runs
down into the tank and primes the drain siphon, which empties the small tank.
humiDisk is suitable for applications such as:
Coolrooms and fresh product storage where lack of humidity leads to
loss of weight and product deterioration.
Printing facilities, where the correct level of humidity must be
maintained in order to avoid variations in paper sizes.
Textile industries, where humidity maintenance is an important factor in
production processes etc…
The humiDisk10/65 are controlled by an ON/OFF signal from a humidistat. The
humidistat is not part of the humiDisk10/65, it is additional.
How Does It Work?
The motor spins the cone at high speed.
The cone sucks water into the atomiser disc.
The disk throws the water to the impact frame
where it is atomised into billions of very small
droplets.
The fan then blows the air out of the mist
diffuser humidifying the required area.
-2ºC to +35ºC & 0 to 90% RH non-condensing
+1ºC to +35ºC & 0 to 90% RH non-condensing
Nominal Water Atomising Capacity
Max. 30 ºFH (300ppm CaC03)
Max. 30 ºFH (300ppm CaC03)
Centrifugal Humidifier 6.5 L/h humiDisk65 with antifreeze heater kit included
Centrifugal Humidifier 1.0 L/h humiDisk10
Wall mounted bracket for humiDisk10
Water supply hose, 1.5m, 3/4" connection for humiDisk10
Water drain hose for humiDisk10
NOTE: humiDisk65 is supplied with Bracket, supply hose & drain hose
Comments to this Manuals