Carel humiDisk User Manual download pdf (Page 14)

<10°

ENGLISH

humiDisk - +030222022 - rel. 2.1 - 01.03.2012

Fig. 2.z

Water connections on the humiDisk

2.8 Final operations

Make sure that all the wires are positioned properly inside the appliance as shown in Figs 2.t and 2.u.

For the humiDisk

check that the junction box is properly closed and positioned correctly, and that the

spring is tightened. The box must have the surface of the cover resting on the two surface locators, as

shown in Fig. 2.w.

• Replace the air ﬁ lter and tighten the three supporting screws;

• adjust the direction of the outlets. To do this, loosen the screws that hold the diffuser on top of the

appliance; see position 1 in Fig. 1.a for

humiDisk

and position 5 in Fig. 1.b for humiDisk

: at the end

of the operation tighten the screw again.

• check that the water connections have been carried out correctly. Open the water supply tap and check

that there are no leaks along the supply circuit.

Fig. 2.w

Fig. 2.v

Water connections on the humiDisk

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Carel humiDisk User Manual Page 14