Carel humiDisk User Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
18
F
R
V
ENGLISH
humiDisk - +030222022 - rel. 2.1 - 01.03.2012
humiDisk is designed to ensure effi cient and faultless operation for an extended time. However, a number
of simple maintenance operations need to be carried out, at a frequency that depends on the environmen-
tal conditions that the humiDisk operates in and on the quality of the supply water.
IMPORTANT: Before carrying out any maintenance, open (switch off) the main switch and wait for the
appliance to come to a complete stop. Close the water supply tap. Observe the general safety instructions
shown in par. 1.1. Before starting the appliance again, duly complete all the checks, as described in this
manual.
6.1 Cleaning the air fi lter
The fi lter must be cleaned periodically, as the accumulation of dirt and dust reduces air fl ow and thus the
effi ciency of the appliance.
6.1.1 humiDisk
10
6. MAINTENANCE
Fig. 6.a
With reference to Fig. 6.a:
remove the fi lter by unscrewing the two fastening screws V;
remove the grill R and the fi lter F;
• clean the fi lter F with a vacuum cleaner or alternatively dip it in slightly soapy water, and rinse: dry
without wringing;
at the end replace the assembly in the reverse order, making sure that the fi lter is correctly positioned
inside the unit and the grill is fastened with the screws.
IMPORTANT: never start the humidifi er without the air fi lter F fi tted and the protective grill R correctly
secured with the screws V!
6.1.1 humiDisk
65
With reference to Fig. 6.b:
Remove the fi lter by unscrewing the three fastening screws;
separate the two plastic grills A from the fi lter material B;
clean the fi lter B with a vacuum cleaner or immerse it in slightly soapy water, and rinse: dry without
wringing
WARNING: never start the humidifi er without the air fi lter fi tted! The air fi lter is made up of three parts that
must be assembled so that the fi ltering material B is enclosed between the two plastic grills A (see Fig. 6.b).
Fig. 6.b
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Comments to this Manuals

No comments